-
Re: 1/16" Bronze lexan
There may be some correlation between solar energy and UV transmittance, but that's not what the measurement is. Solar energy %, is measuring heat transfer through the material. Clear - 85% of the heat transfers through and 2412 only 35% through.
Although, bronze 2412 only lets 25% of the light through - visible light measured at 6500 deg. Kelvin (normal daylight). So it's pretty dark. Might try getting a small piece of film with the same light transmittance (sample from car shop) and seeing if you really want it that dark.
Also, be aware the spec numbers (2000 series) you've given usually refer to plexiglass - in this case Acrylite, not polycarbonate - Lexan. Bronze Lexan usually uses 5000 series numbers. Might be why it is much less expensive than I would expect. Worth looking into/verifying.
Your thickness range is about right, some acrylics (depending on which one you actually end up using) have a bending radius of 100 times their thickness.
Greg
-
Re: 1/16" Bronze lexan
the colors are examples.I have a piece of the lexan bronze here at home but not big enough to use on anything,..it is the same shade as the 2412,..the other examples are not from the same vendor,..but only examples to give an idea of advantage or disadvantage of using tinted lexan
-
Re: 1/16" Bronze lexan
Sabic Plastics
Naperville Chicago Illinois office number
Tel: 630-428-4350
I called the St Louis office number
Tel: 314-738-0088
or use this link to find an outlet near you
http://www.sabicpolymershapes.com/po...r/branchus.jsp
-
Re: 1/16" Bronze lexan
Ah, Good info for me to keep in mind for future use! I wasn't questioning your wanting to use tinted Lexan, I was questioning whether you were really getting what you wanted. As, anywhere I have bought Lexan in the past, the price point was at least 3 times the price quoted to you. Their minimum and shipping charges though, might be where they are making their money - pretty damn high! Or they just don't like dealing direct with consumers!
Greg
-
Re: 1/16" Bronze lexan
Could be Greg, or the 168 sheets in chicago was ordered by another and then backed out, and they need to move it, i have also bought allot of lexan for various reasons, once in a while you
Can get some deals on it, i have also bought delrin and other plastic composition products onlinemetals based in houston missouri carry's allot of the exotics but no lexan dang it :)
-
Re: 1/16" Bronze lexan
VA appt in am, bunch of X rays gotta hit the sheets :) color me gone :)