What hardware did you use to attach the removable Hoener wingtips to the aluminum mounting strips? I was planning on using 6x32 rivnuts, but was curious about the screw head style and/or washer type.
Thanks,
Mike Kahle
Printable View
What hardware did you use to attach the removable Hoener wingtips to the aluminum mounting strips? I was planning on using 6x32 rivnuts, but was curious about the screw head style and/or washer type.
Thanks,
Mike Kahle
I used the #6 (I believe) phillips pan head screws and nylon washers that came with the kit.
I used 50-some #6 nut plates on the bottom of the aliminum strip and stainless pan screws with nylon washers underneath them.Quote:
Originally Posted by jiott
Thanks Gentlemen.
The model 7 'standard upgraded' wingtips are attached with (40) AN526-832R10 (#8) screws and nut plates.