Ralph, we'll now I feel pretty silly. Of course there would be a tool for dealing with these springs. I'll cheap out and try my parachute chord first. If putting them back on turns into a hassle, I'm off to the auto parts store. Thanks for the tip.
Printable View
Ralph, we'll now I feel pretty silly. Of course there would be a tool for dealing with these springs. I'll cheap out and try my parachute chord first. If putting them back on turns into a hassle, I'm off to the auto parts store. Thanks for the tip.
Well don't feel bad Carl. I have one of those tools but I never considered using it. After all, these weren't brake springs.:o I used a screwdriver through the spring and pulled hard.
Carl
When you say you purchased your 912iS from the factory are you referring to Kitfox or the Rotax factory?
Joe G.
Great progress Carl. Yes, those springs can be a bit difficult - some harder than others due to access. By the way, I have had several of the factory (Rotax) supplies springs break. My local "Mr Rotax" had heaps of stainless ones made up and has never seen them break - replaced my full set at $5 a spring.
Anyway, great to see other 912is installations. Also, I have had a couple of the EGT sensors go - At $200 plus a sensor I was keen to see if the 915 sensor would be a good replacement as it has been redesigned. HOwever, I have just been advised that the 915 sensor is not compatible with the 912is ECU - so it is back to replacing the 912is EGT sensor with like and carry a spare!!
cheers
r
Joe,
Both my 912iS and prop came from the Kitfox factory.
For a nominal fee, Kitfox built wiring harnesses for the Rotax HIC and X3 (fuse box) connectors. The individual wires are color coded and neatly labeled. A printed sheet documents each connection.
I was leaning towards the carbonated 912. Fooled around with carborators on motorcycles and owned a Fiat Spyder in my youth. However, John McBean made a couple of convincing points in favor of the iS: Push the button and it starts every time, and it will have a higher resale value. Didn't take much convincing after admitting to myself that I really enjoy the reliable starts of my injected Triumph Bonneville. I'm not in my 20's anymore - sigh.
If you build it, they will come.
The first overnight guest in the new hanger is a 1942 Naval Aircraft Factory N3N-3. A friend is on his way to an airshow and the grass strip and free hanger space at Aero Estates (T25) made a convenient stop. The young attendants are two of his delightful children. Details about the "Who Flies the Next Leg With Dad" raffle are sketchy outside their immediate family. Homeschooling offers some unique field trip experiences.
Hangar looks great Carl, and then to top it off, you have such a great plane for a sleepover. Couldn't be better ...
Any updates to this thread?
Mind reader Shadowrider ... I've been wondering where Carl is these days .... he was making great progress and the new hangar was the cherry on top. Hope everything is ok.
Hahaha, Ive been wondering as well. I saw this thread appear and out of 15 posts came directly here first. Last I spoke with Carl, He was very busy.