spacing between comm and transponder
Im laying out my instrument panel. I have a icom a200 and a kt76a. I was going to put the transponder below the comm. There are air holes on top of the trans. Is there a minimal gap to leave between the two, or should i put the transponder on top of the comm ? Thanks, ken
2 Attachment(s)
Re: spacing between comm and transponder
no problem with our spacing
Re: spacing between comm and transponder
Thank you for the nice pics. Mine will look very similar. Ken
1 Attachment(s)
Re: spacing between comm and transponder
You will find that most Cessna and Piper spacing is similar to what I did, about 1/8" between bezels.
1 Attachment(s)
Re: spacing between comm and transponder
My Factory Built SLSA they go in one large hole. The com works well, no issues.