Printable View
A while back, someone posted a wonderful schematic of their Kitfox panel wiring. Anyone have a link to that or can it be reposted here?
I'm getting to the point very soon where I'm going to start wiring and I want to do it right the first time. I'm not an electrician, but I can follow a schematic.
I want to be sure to wire the radio (iCom A210), mic jacks, and the rest correctly so to minimize noise...
Check Bob Knuckles AeroElectric Connection at: www.aeroelectric.com his reference manuals have sample wiring diagrams and recommended procedures.
Ralph
Here's mine to help generate some ideas. This doesn't include the headphone jacks, push to talk switches nor antennas. Needless to say, those all have shielding. The numbers in green are serially assigned wire numbers for marking.
Airfox has a good schematic that he has posted previously.
Also the Van's website has a very complete schematic for their RV12 with Dynon panel that can be downloaded.
Here is my electrical schematic. I used Advanced flight System components. For reference only.
Attachment 8569
I keep this in my smart phone for quick reference.
Scott
Nice diagram! What software program did you use to do that? Thanks!Quote:
Originally Posted by AirFox
Clark
Autocad.
Attachment 10120 For reference only.
Updated my schematic in an effort to eliminate potential voltage regulator failures. I'm planning on replacing my Ducati regular with the silent-hektik/UL_R_912.htm.
Scott