Fuel Lines For 912UL

What fuel lines are you guys using? I have thought about using fuel injected lines cause they are stiffer and wont collapse. I'm not sure this is a good idea.

I have bought some gates barricade fuel line low permutation. It seems to be ok but I am worried it is a little to pliable and may pinch.

Any thoughts?

The Gates barricade is what I use. If you are worried about it getting pinched, try and route it someplace else. I am thinking if the possibility of getting pinched would also be a spot that might get worn through via vibrations. Just my 2 cents.

Quote:

---

Originally Posted by WWhunter

The Gates barricade is what I use. If you are worried about it getting pinched, try and route it someplace else. I am thinking if the possibility of getting pinched would also be a spot that might get worn through via vibrations. Just my 2 cents.

---

Are you using the carb or fuel injected lines?

The standard carb type. I ordered a roll of it from online.

I use it also.

Are you using gear clamps or push-ons?
Im looking at push ons and I'm trying to fabricate or duplicate as closely as possible, the connections that came with the engine.