Hey Finn, I plan on replacing my tank to header fuel lines with the new header , do you recall where you got the fuel line, Thanks bruce
Printable View
Hey Finn, I plan on replacing my tank to header fuel lines with the new header , do you recall where you got the fuel line, Thanks bruce
Bruce,
The stuff I used is Goodyear 30R9 fuel injection hose (very low permeability). It was recommended on another thread like this and I have had good luck with it, found it at one of my local Auto parts stores. The stuff is not in the cheap isle :)
Chase,
Don't know if it is the same stuff that Spruce sells, what PN from Spruce?
thanks Finn I will check it out, bruce
My bust its black in the middle 05-03597
As a data point I have the poly tank and stainless braided teflon fuel line. I think its teflon. I got it from Blue Sky aviation along with my turtledeck. Anyway, I have not noticed any fuel odor but I do have some mild blue staining around the tank fittings.
Finished replacing my old poly header with the new aluminum one from Kitfox, and it fixed the stink problem. I was hoping for a simple remove and replace, but alas this was not to be. Although all my fuel lines lined up fine, the mounting hard points were in a different spot on the new tank and my header tank drain didn't quite line up so some homebuilding was needed (read a 2 day job) Glad I did it though-no more stink! Bruce N199CL