Here is what I did. Used a 4-40 rod and Clovis from the hobby shop:
Printable View
Here is what I did. Used a 4-40 rod and Clovis from the hobby shop:
And another picture
And another view:
I have the Skyview system. I used the same on my RV-10. I'll check the wiring tomorrow.
OK, thanks again.
Of what I understand is that the sensor has to connect to the EMS module and only has one wire for this purpose, the sensor has 3 (orange, green and blue ), my guess is the green one. Just want to be sure on this before I continue. Now I know the Ray Allen sensor can be used with the Skyview.
Leonardo
http://www.vansairforce.com/communit...p?t-69494.html
Look at the above link. Looks like orange is power (5v from ems module), blue is ground and green is the sensor output.
I hope this helps!
I would like to thank everybody for the advice on this matter. Here is how I did it, works very good. (I changed de quick link for a new one.)
Thanks again.Attachment 11556
Attachment 11557