When we started our goal was to have a simple, clean panel and I think we've accomplished that.
Step 1 - How to Populate Panel - Done
This was a 2 year process that was finalized at least 3 times, then changed.
Step 2 - Panel Layout - Done (I hope)
It took about a month of btting ideas back and forth. Informally we considered where items would be placed as they were decided on.
Step 3 - Planning to cut - Done (unless it changes, again)
We are on Rev. 3 and it is currently the final layout, though it is open to change until the cutting begins. Note: Android ASUS Transformer Tablet Computer (running Naviator) will be mounted with a RAM mount.
Step 4 - Cutting - Done(I'm thinking this is a Major Milestone)
With the help of Robert Haines (fellow member of EAA 292), we got the panel cut on Roberts home made CNC machine (8' x 16' cutting bed).
Step 5 - Painting and Populating - WIP
OK, all of the instruments are fitted and surprisingly, it looks almost exactly like the drawing I made. If you're interested you can follow us
here.