Supporting vendors:
Your ad here?

Go Back   TeamKitfox Forums > Members List

SWeidemann SWeidemann is offline

Visitor Messages

Showing Visitor Messages 1 to 10 of 11
  1. mr bill
    06-28-2017 07:52 PM
    mr bill
    Next time, feel free to interrupt. What airplane were you flying? I am still working on the fuel leak.
  2. mr bill
    06-10-2017 05:46 AM
    mr bill
    Hi Scott:
    Hopefully you will fly your Kitfox into 02C (Capitol Airport, Brookfield Wi) one day. My Kitfox 4 is done and has it's Airworthiness, but is awaiting first flight due to a fuel leak.
    mr bill (Bill Stilley 414=315-8589)
  3. dholly
    12-07-2016 10:48 PM
    Hi (Skot?) - Performance info and more at Personally, I think the Aerotrek is a heck of nice SLSA, extremely well thought out with impeccable fit and finish, the best for the price. Cabin is very comfortable with bowed bubble doors, and over an inch wider than the KF7. However, I also think I would prefer the KF7 if I had the funds and was not limited by Sport Pilot regs. Compare M.T.O.W. 1235lbs. vs. 1550lbs., useful load 580lbs. vs. 800lbs., luggage compartment capacity 150lbs. vs. 50lbs. Empty weight 655lbs. vs. 750lbs. The KF SLSA is a bit larger overall and costs about 10%, or $7-8k more, than the Aerotrek for comparably equipped 'base' models. Unfortunately, the KF7 SLSA at 1320lbs. for SP has less useful load than the Aerotrek. Hope that helps.
    04-24-2015 06:31 PM
    04-24-2015 06:25 PM
    Hey Skot,
    Very nice to meet you at Iola today. I noticed you were taking some pictures when I took off, if possible could you email me an inflight picture if you have one. I really don't have any. Again, it was a pleasure to talk to you. Dan
    01-01-2015 08:59 PM

    Yes you are correct. The original round tubing strut worked well until my emergency landing back in May which bent it down severely(do to fork digging into wet marsh grass) until It broke off at the rubber isolators attach point. I did replace it with the current style and seems to work fine, also used my original wheel, fork and mounting brackets to the fuselage. As I stated in an earlier post, the part from the McBean's was 495.00 which I thought wasn't too bad. The streamline strut does seem beefed up compared to my original. Good luck to you Skot.

  7. Paul Z
    12-08-2014 10:51 AM
    Paul Z
    I think I have sent the pictures of my header tank installation. Computer is acting up. Let me know if you get it and if you have any questions.
  8. Paul Z
    12-02-2014 09:02 PM
    Paul Z
    I'll do some searching I have some photos that will help. As soon as I find the photos I'll describe it the best I can.

    Do you have an email I could send the photos too, mine is

    I had read your post and looked and looked and couldn't figure out which thread it was in. I just tripped across it today.
  9. Colombiafox5
    09-05-2014 05:53 PM
    Hi, please excuse me for not answering before I been working to much, yes in did, we remove the carbs, then we remove the engine and change the engine mount supports also weld the engine mount and paint it with powder paint red. Work very nice for us! We remove the carbs because we service them also.
  10. WISDAN
    01-20-2014 08:12 PM
    Hi Skot, I just wanted to know the ski plane fly in is Feb. 15. The wrong date Feb. 22 somehow got posted on our website. Sorry for giving you the wrong info. All other info sent to you is correct.

    Dan Gallow

About Me

  • About SWeidemann
    Your name (required)
    Skot Weidemann
    Location (required)
    Madison, WI
    Interests (optional)
    Sport Aviation, General Aviation
    Occupation (optional)
    Kitfox status
    Kitfox Model
    Series 5
  • Signature
    Kitfox Vixen 912 ULS
    N24V at C29


Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 11:16 PM
  • Join Date: 11-21-2009


Showing Friends 1 to 3 of 3

All times are GMT -7. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.