Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
No Recent Activity

3 Visitor Messages

  1. Hello....everything seems to be working fine all sensors detected but the oil pressure, I'm getting the red cross, the connection is very simple, 2 wires, one is sensor and the other is 12 v. The Dynon manual could be confusing about where to put the red wire having the pressure sensor in front of you right or left? tried both and still not working.
  2. Hi all.....Just finished installing all Dynon stuff, before continuing it will be nice to have the trim positioning indicator on screen, there is a wire coming from the EMS module (pin 23 Purple/green) Elevator position potentiometer. Any body use this? And what kind of potentiometer can I use?
    Leonardo
  3. Hello.....it has been a year and a half since my last post, but the ss7 is looking like an airplane now. I got the plane from a friend that bought it in 2007 and paid kitfox to build it but he got stuck, and, in mid 2013 I continued the proyect, it came Mexico covered with the first coat of polybrush only, he told me that he was planning to install a Dynon system and a rotax 912, so, that's what I got. The situation here is, the plane came with the pitot tube installation just like the manual says using the one that the kit has with a single line, the Dynon uses a pitot probe w/aoa, so what can I do to solve this problem without making a big mess on the covering?, wings are painted already.
    Leonardo
Showing Visitor Messages 1 to 3 of 3
About silvaleonardo

Basic Information

About silvaleonardo
Your name (required):
Leonardo
Location (required):
Uruapan, Mexico
Interests (optional):
Aeromodeling
Occupation (optional):
Agriculture
Kitfox status:
Flying
Kitfox Model:
Super Sport

Statistics


Total Posts
Total Posts
36
Posts Per Day
0.01
Visitor Messages
Total Messages
3
Most Recent Message
08-15-2016 09:25 PM
General Information
Last Activity
12-01-2022 09:34 AM
Join Date
12-30-2013