Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch

Wing Build

Pictures from my wing build
  1. DSC 0566
  2. DSC 0568
  3. DSC 0573
  4. This is the mounting plate for my AFS AHRS.  I placed it as close to the fuselage as possible to avoid calc errors in the 5600 unit.
  5. Flaperons installed and drilled.
  6. The control horns are ready to drill once I set the angles.  I used a 2x4 to hold the flaperons up.
  7. My RV Buddy came over to help me out with solid rivits.  We used a countersink with a rivit squizer.
  8. My RV Buddy came over to help me out with solid rivits.  We used a countersink with a rivit squizer.
  9. One Wing down on the Laker Leading edge kit.  Lots of trimming with the dremel to get these to the correct size.  Takes a little time but pretty...
  10. Have of wing #2
  11. Lucky for me it fits in the garage.
  12. Lots of work to get those brackets installed.
  13. IMG 6560
  14. Wing Tanks installed
Showing photos 1 to 14 of 14